665 Heavy N2O Options

 

665 BBC 20 Degree Conventional Heads Heavy Nitrous Engine Options
by Raymac Racing Engines
 

Got JUICE???
665 cu.in. by Raymac Racing Engines
20 Degree Conventional Head, Heavy N20 - $31,740 Dyno’d

Block:
Dart Big M Pro, Steel Main Caps, 4.600 Bore, 10.6 Deck
Rotating Assembly:
Callies Magnum 5in Stroke Crankshaft
GRP Aluminum Rods 6.890 Long
Qty 10 - JE N20 Pistons (Custom) 20 Degree Dart, 14:1 Compression, 1.200 C.D.
Clevite “H” Series Bearings
Heads:
Dart Pro1 451 CNC 20 Degree, .900 Lift
ARP Head Studs, Dart Valley Lug Kit
Clark; Dead Soft, 4.620 x .042 Head Gaskets
Valve train:
Bullet Custom Camshaft 4-7 Swap, N20
Comp Cams High Pressure Oil Mechanical Roller Lifters
Manton/Trend 7/16 Pushrods
Jesel Shaft Rocker System 1.85/1.8 Ratio, 20 Degree Dart
Jesel Belt Cam Drive
Oil System:
Moroso Fabricated Oil Pan, Partitioned Windage Tray, 8qt
Moroso Billet Oil Pump, Integral Pick-up, Moroso Driveshaft
Induction System:
Profiler “Sniper” Intake 2 x 4 w/Top
Qty 2 - Quick Fuel 1150, Tunnel Ram 2 x 4, Carburetors
Enderle Sideways Twin Domination Linkage Kit
Qty 2 - ½” Dominator 2” 4 Hole Carb Insulator
Induction Solutions Fogger Kit (Up to 600HP)
Ignition System:
MSD Crank Trigger
MSD Distributor, Slip Collar, Moroso Wires
ATI (Internal Balance) Balancer, Balancer Bolt
Moroso Fabricated Short Valve Covers, Conventional Head
Plugs, Oil, Filter, Pan Gasket, Interal Gasket, Valve Cover Gasket, R/M Seal
Hardware, Distributor Clamp

Labor:
Hone Cylinders
Deck Block
O’Ring Block
Receiver Grove Heads
Fit Pins, Pistons & Rods
Balance Crankshaft
Polish Crankshaft
Disassemble, Lap & Set Spring Heights, Wash, Reassemble
Port, Port Match Intake
Final Wash All Parts
Assemble Engine, Fit Bearings, Fit Rings, Degree Cam, Set Compression, Check Piston to Valve Clearance, Assemble
Dyno w/ N2O

Total: $31,740 Dyno’d

 

ADDITIONAL AVAILABLE OPTIONS:________________________________
Brodix Aluminum Block Upgrade +$2800
Bryant Crank Upgrade +$1450

14.5 Degree Big Chief with Nitrous Conical Chambers,
Titanium Valves,
580 cfm, Upgrade +$5400
Includes:
• Hitman Intake Upgrade
• Big Chief Jesel Upgrade
• Fabricated Big Chief Valve Cover Upgrade
• 14.5 Degree JE Piston 14:1 Compression Upgrade

Raymac Racing Engines
RaymacRacingEngines.com
This email address is being protected from spambots. You need JavaScript enabled to view it.
817.705.5424




Contact Raymac Racing Engines

       This email address is being protected from spambots. You need JavaScript enabled to view it.  

Call us for a free quote!

817.705.5424   or  940.594.0350

All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.

09/05/18 California law now requires any reseller of California based manufactured parts (including by not limited to Dart, Race Winning Brands, AFR, Scat and Brodix) to inform it's customers of the following (in accordance with Proposition 65): WARNING: May Cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov. The notice also states these California based part manufacturers will be placing warning labels on those products effected (affixed to products, labels or packaging).

 

TOP

Style1

Style2

Style3

Style4

Style5

Style6

Style7

Style8

Style9

Style10