434 SBC 650hp

 

 

  • 434 SBC 650hp on Pump Gas (Street/Strip/Drift)

     

     

    Parts:
    • Motown 2, 4.125 x 9.025, 350 Main 2pc Oil Seal (Gen I)
    BMP 235, 2.08/1.600, 64cc Chamber, Solid Roller, Max Lift .700, 301/215 cfm
    • Callies 4in Crankshaft Compstar
    • King Alecular Main Bearings, Michigan/Clevite “H” Rod Bearings
    • JE/SRP 4.155 Bore, 1.0” C/D, 16cc Dish, 10.9:1 with 64cc, FCR Forging
    • JE 1.2mm Steel Top Ring, 1.5mm Napier 2nd, 3mm Std Tension Oil
    • JE MLS Stainless Head Gaskets
    • ARP Head Studs
    • Crane “Gold” Rocker Arms 1.6/1.5 Ratio
    • 7/16” SBC Double Stud Girdle
    • Trend 5/16 .080 Wall Pushrods
    • BMP SBC 4150 Single Plane Intake
    • Quikfuel (Q950) Road Race
    • Comp Cams Solid Roller “Road Race” Camshaft, Billet, 2pc Core, 4-7 swap
    • Comp Cams High Pressure Oil Mechanical Roller Lifters
    • Double Tru Roller Timing Set w/Steel Billet Gears, Torrington Thrust Button Lock plate
    • GM Chrome Timing Cover
    • ATI Balancer & Balancer Bolt
    • Moroso Road Race Wet Sump Pan 7 ½” Deep, 7qt
    • Moroso ¾” Pickup & High Volume/Pressure Oil Pump, Fully Welded, Hardened Drive Shaft
    • Moroso 3qt Oil Accumulator
    • MSD SBC Race Distributer
    • MSD 2AL Ignition w/ Rev Limiter
    • MSD Custom 8.8mm Race Wires
    • Oil Pan, Intake, Timing Cover & Valve Cover Gaskets and Hardware, Plugs, Oil, Filter, Filter Mount, Dist Clamp, Carb Studs, Carb Spacer, Oil Plugs, Cam Bearings
    Freeze Plugs, Oil Pressure Fitting
    • Polished Aluminum Tall Valve Covers
    Total Parts $10,629
     
    Labor:
    • Hone Cylinders w/ Torque Plates
    • Deck Block
    • Pin Fit, Pistons & Rods
    • Polish Crankshaft
    • Balance Crankshaft
    • Disassemble Heads, Lap, Clean, Set Spring Heights
    • Wash All Parts (Final Wash)
    • Assemble Complete Motor
    • Dyno
    Total Labor: $2230
     
     
    Parts Kit & Labor: $12,859
    ---------------------------------------------------------
     
    Additional Options:
    • Water Pump, Edelbrock
    • Serpentine Belt System
    • Alternator
    • A/C Compressor
     

 

Contact Raymac Racing Engines

       This email address is being protected from spambots. You need JavaScript enabled to view it.  

Call us for a free quote!

817.705.5424   or  940.594.0350

All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.

09/05/18 For our Scat customers..... California law now requires any reseller of Scat products to inform it's customers of the following (in accordance with Proposition 65): WARNING: May Cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov. The notice also states that SCAT will be placing warning labels on those products effected (affixed to products, labels or packaging).

 

TOP

Style1

Style2

Style3

Style4

Style5

Style6

Style7

Style8

Style9

Style10