• 383 Complete Engine Kit (Less Block)

   

  • Dart Iron Eagle SS heads 165cc runner 76cc chamber

  • Pro Typhoon aluminum intake manifold

  • SS 2.02" intake valves

  • SS 1.60" exhaust valves

  • 1.260" single springs 340#@1.250"

  • Chromoly valve spring retainers

  • Hardened 11/32" valve locks

  • 4140 moly 3/8" rocker studs

  • 4130 moly 5/16" guide plates

  • Viton valve seals

  • Elgin Pro Stock 1.5 stainless steel rockers

  • JPW 5/16" Chromoly 7.800 pushrods

  • Chevrolet Performance Tall Chrome Valve Covers

  • Fel Pro kit gasket set

  • Elgin head bolt kit

  • ARP 8740 moly complete engine fastener kit

  • Scat/Eagle cast 3.75" crankshaft 2 pc. seal

  • 5140 I beam 5.7" connecting rods w ARP bolts

  • KB Claimer Hypereutectic Flat Top Pistons

  • Mahle PC moly rings

  • King rod & main bearings

  • Durabond cam bearings

  • Durabond HP finishing kit - Brass exp plugs

  • Pioneer Balancer bolt/washer

  • Melling Hi Volume oil pump

  • Melling pump drive drive shaft

  • ARP oil pump stud kit

  • 3 Keyway Roller timing set

  • Comp Cams cam button

  • Comp Cams XE268H hydraulic cam

  • Johnson Hydraulic anti pump up lifters

  • Steel 7qt. pan, 8.25" deep

  • Oil pump pickup

  • Powerbond harmonic balancer ext. bal.

  • Chevrolet Performance Chrome Timing Cover

  • Chrome timing tab

   

  

  Parts in Kit form: $2940

  Assy & Dyno (Dyno required): $1750

  Total for Parts, Assy & Dyno: $4690

   
  Want to add a block.....
  

  Dart SHP Block (if purchased with kit) $1312
  

  Dart SHP Block (if purchased separately) $1448

  
  

  Accessories Available:

  • Carb: Quick fuel, Holley, Edelbrock

  • Ignition HEI & Wires $158

  • Water Pump (Iron or Aluminum)

  • Starter

  • Alternator & Mount

  • Pulleys

  • Fuel Pump

  • Flywheel/Flexplate

• Stage 1 Economy 383 Stroker Kit

   

  • Cast from 80-60-06 Iron 3.75 Stroke

  • Reconditioned 5.7 rods w/ARP 8740 bolts

  • Sterling Cast Pistons

  • Sealed Power Moly Rings

  • King Rod & Main Bearings

   

  Total $737.00

   

  Will need Flywheel & Flexplate to balance if you want us to balance it.

   

• Stage 2 Performance 383 Stroker Kit

   

  • J-E Pistons F/T or 7cc Dome

  • J-E Rings

  • 5.700 H-Beam w/8740 bolts

  • 4130 Forged 3.75 Stroke

  • 350 Main Crank

  • King Bearings

   

  Total: $1875

   

• 427 All Aluminum Small Block Chevy (SBC)

   

  

  
  

  SHORT BLOCK

  • BMP (Formerly World Products) Aluminum Block, 4.125 Bore

  • Manley 4340 Non-Twist 4in Stroke, Internal Balanced, Crankshaft

  • Manley 6” 4340 Rods w/ARP 2000 Bolts

  • Manley Platinum 20cc Dish or Flat Top Pistons, 9.2 to 13.5:1 Compression

  • Total Seal Plasma Moly Ring Set

  • Michigan H Rod Bearings & P Main Bearings & Cam Bearings

  • Comp Cams 2pc Roller Camshaft (does not need bronze gear on distributor!)

  • Double Tru Roller Timing Chain w/Steel Billet Gears

  • Comp Cams Sportsman Solid Roller Followers

  • Chrome GM Timing Cover and Pointer

  
  

  LONG BLOCK

  • Aluminum 215cc CNC Heads Angle or Straight Plug 2.08/1.60 Stainless Valves, Solid Roller Springs, .690 Lift, 310 cfm!

  • ARP Head Studs (for Aluminum Block SBC)

  • JE MLS Head Gaskets, .040 Thick

  • Crane Gold Rocker Arms

  • Stud Girdle & Poly Locks

  • Trend Push Rods

  • Moroso 7qt Drag Pan

  • Moroso High Volume Oil Pump w/welded Pickup

  • Inbound Freight to Shop (Ft. Worth, Texas)

  • Machine & Dyno

  
  

  Total $13,200

  ________________________________________________________

  
  

  OPTIONAL ADDITIONS: (Call for pricing)

  Intakes

  Carb

  Balancer

  Ignition

  Valve Covers

• Stage 3 Race Duty 383 Stroker Kit

   

  • J-E Pistons FTP 7cm Dome

  • 4340 Manley 6.0 Rods, H-Beam

  • Manley 3.75 4340 Crankshaft

  • Internally Balanced Crankshaft

  • King Alecular Bearings

   

  Total: $2050 + freight
  

• Stage 4 Race Duty 383 Stroker Kit

   

  • Manley Kit F/T Dome 1.669

  • 3.75 Manley

  • Internally Balanced

  • 4340 Manley 6.0 Rods, H-Beam

  • ARP 2000 Bolts

   

  Dome top total: $2,243 + freight

   

  Dart SHP Block (if purchased with kit) $1250.00  

  Dart ShP Block (if purchase separately) $1375.00

   
  

• 427 SBC Short block

   

  

   

  427 SBC Short Block - Assembled - $6076

  • Internally Balanced
  • Special High Performance Dart Block (SHP)
  • 4.125” Bore x 4.000” Stroke
  • Plate Honed Cylinders
  • Forged 4340 Steel Crankshaft
  • Forged 4340 H Beam Rods - 7/16” Cap Screws
  • Forged Flat Top Pistons w/Full Floating Pin
  • MAHLE Rings
  • Clevite Bearings
  • Coated Cam Bearings
  8.5 to 12.5:1 Compression

   

  OPTIONAL ADDITIONS
  20cc Dished Pistons. Reduce CR by 1.2. (call for price quote)

• 427 SBC All Aluminum Small Block Chevy (Short block & Long block)

   

  

   

  SHORT BLOCK

  • BMP (Formerly World Products) Aluminum Block, 4.125 Bore

  • Manley 4340 Non-Twist 4in Stroke, Internal Balanced, Crankshaft

  • Manley 6” 4340 Rods w/ARP 2000 Bolts

  • Manley Platinum 20cc Dish or Flat Top Pistons, 9.2 to 13.5:1 Compression

  • Total Seal Plasma Moly Ring Set

  • Michigan H Rod Bearings & P Main Bearings & Cam Bearings

  • Comp Cams 2pc Roller Camshaft (does not need bronze gear on distributor!)

  • Double Tru Roller Timing Chain w/Steel Billet Gears

  • Comp Cams Sportsman Solid Roller Followers

  • Chrome GM Timing Cover and Pointer

  
  

  LONG BLOCK

  • Aluminum 215cc CNC Heads Angle or Straight Plug 2.08/1.60 Stainless Valves,

    Solid Roller Springs, .690 Lift, 310 cfm!

  • ARP Head Studs (for Aluminum Block SBC)

  • JE MLS Head Gaskets, .040 Thick

  • Crane Gold Rocker Arms

  • Stud Girdle & Poly Locks

  • Trend Push Rods

  • Moroso 7qt Drag Pan

  • Moroso High Volume Oil Pump w/welded Pickup

  • Inbound Freight to Shop (Ft. Worth, Texas)

  • Machine & Dyno

  
  

  OPTIONAL ADDITIONS: (Call for pricing)

  Intakes

  Carb

  Balancer

  Ignition

  Valve Covers

  
  Follow us on Facebook Click Here
  

  RaymacRacingEngines.com

  940.594.0350 Office/Text

  817.705.5424 Shop/Dyno
   
• (Price subject to change and is based on availability.)

Contact us for more details at 940.594.0350 or 817.705.5424. 

Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability

• 434 SBC 650hp on Pump Gas (Street/Strip/Drift)

   

  

   

  Parts:

  • Motown 2, 4.125 x 9.025, 350 Main 2pc Oil Seal (Gen I)

  BMP 235, 2.08/1.600, 64cc Chamber, Solid Roller, Max Lift .700, 301/215 cfm

  • Callies 4in Crankshaft Compstar

  • King Alecular Main Bearings, Michigan/Clevite “H” Rod Bearings

  • JE/SRP 4.155 Bore, 1.0” C/D, 16cc Dish, 10.9:1 with 64cc, FCR Forging

  • JE 1.2mm Steel Top Ring, 1.5mm Napier 2nd, 3mm Std Tension Oil

  • JE MLS Stainless Head Gaskets

  • ARP Head Studs

  • Crane “Gold” Rocker Arms 1.6/1.5 Ratio

  • 7/16” SBC Double Stud Girdle

  • Trend 5/16 .080 Wall Pushrods

  • BMP SBC 4150 Single Plane Intake

  • Quikfuel (Q950) Road Race

  • Comp Cams Solid Roller “Road Race” Camshaft, Billet, 2pc Core, 4-7 swap

  • Comp Cams High Pressure Oil Mechanical Roller Lifters

  • Double Tru Roller Timing Set w/Steel Billet Gears, Torrington Thrust Button Lock plate

  • GM Chrome Timing Cover

  • ATI Balancer & Balancer Bolt

  • Moroso Road Race Wet Sump Pan 7 ½” Deep, 7qt

  • Moroso ¾” Pickup & High Volume/Pressure Oil Pump, Fully Welded, Hardened Drive Shaft

  • Moroso 3qt Oil Accumulator

  • MSD SBC Race Distributer

  • MSD 2AL Ignition w/ Rev Limiter

  • MSD Custom 8.8mm Race Wires

  • Oil Pan, Intake, Timing Cover & Valve Cover Gaskets and Hardware, Plugs, Oil, Filter, Filter Mount, Dist Clamp, Carb Studs, Carb Spacer, Oil Plugs, Cam Bearings

  Freeze Plugs, Oil Pressure Fitting

  • Polished Aluminum Tall Valve Covers

  Total Parts $10,629

   

  Labor:

  • Hone Cylinders w/ Torque Plates

  • Deck Block

  • Pin Fit, Pistons & Rods

  • Polish Crankshaft

  • Balance Crankshaft

  • Disassemble Heads, Lap, Clean, Set Spring Heights

  • Wash All Parts (Final Wash)

  • Assemble Complete Motor

  • Dyno

  Total Labor: $2230

   

   

  Parts Kit & Labor: $12,859

  ---------------------------------------------------------

   

  Additional Options:

  • Water Pump, Edelbrock

  • Serpentine Belt System

  • Alternator

  • A/C Compressor