665 14.5 Degree

 

665 BBC 14.5 Degree Big Chief Tunnel Ram - "Bat Out Beast"
by Raymac Racing Engines
(1300HP in Single 4 Barrel, 1900HP on 1 Stage)
 

Short Block Kit: $9,305
Dart Raised Cam 4.600 Bore 55mm Cam
• Block 10.400 Deck CNC Stroker Clearance

• JE Pistons 4.600 Bore 1.115 C/D, 15.1:1 Compression
• Callies 5in Stroke 4340 Magnum Crankshaft, Internal BalancedJE .200 Wall 93s HD Pins
• JE Rings Nitrited Steel Top, Napier 2nd, Standard Tension Oil, .043. 1/16, 3/16
• GRP 6.760in Long 5500 Pro Series Connecting Rods
• King & Clevite Rod & Main Bearings, 55mm Roller Cam Bearings

Valvetrain & Oil System $10,396
• Manton 7/16” Pushrods
• Jesel +.600 Belt Cam Drive
• Jesel 1.5/1.80 Ratio Rocker Arms
• Bullet Custom 55mm Camshaft 4-7 Swap
• Morel High Pressure Oil, Mechanical Roller Lifters, Ultra Pro, .180 Offset
• Moroso Custom Oil Pan
• Stock Car Products External Pump & Drive Kit

Heads & Hardware: $7,460
• Brodix 14.5 Degree CNC Heads, Titanium Valves .900 Lift 587 CFM
• Moroso Fabricated Valve Covers
• ARP Big Chief 12pt Head Studs
• Dart Valley Lug Kit
• Cometic Head Gaskets

Induction: $3,136
• Profiler Hitman Tunnel Ram Intake Manifold
• Profiler 1x4
• Dart Intake Spacer Kit
• ½” Carb Spacer
• Quickfuel 1450 cfm Dominator

Ignition: $580
• MSD Crank Trigger
• Distributor
• Wires

Finish Out: $700
• ATI Balancer
• FelPro Rear Main Seal, Oil Pan Set, Intake Gaskets, Valve Cover Gaskets, Plugs, Oil, External Oil Filter, Oil Lines, Distributor Clamp, Balancer Bolt, Hardware Kit.

Labor: $3,896
• Stroker Clearance Block
• Seat Liners
• Set Liner Protrusion
• Hone all Cylinders with Torque Plate & Valley Lugs
• Pin Fit Pistons & Rods
• Polish Crankshaft
• Port Match, Spacers, Heads & Intake
• Final Wash All Parts
• Assemble: Selectively Fit Bearings, File Fit Rings, Check all Clearances, Degree Camshaft, Check Piston to Valves, Set Compression, Setup Valvetrain, Port Match Spacers, Heads & Intake, Professionally Assembled.
• Dyno Test & Tune (With N2O)

Engine Kit (No Labor) $32,076
Engine Kit Assembled & Dyno’d $35,972

---------------------------------------------------------
Options:
Brodix Aluminum Block +$2400 (includes ARP Block Studs)
2x4 Carbs Top, Linkage & Spacers +$1500
+30HP 1650 CFM Dominator Carburetor +$2,200
Dry Sump +$3,400
Aluminum ATI Balancer +$105
Precision O’Ring & Receiver Groove Block & Heads +$750
Nitrous System Prices Available Upon Request


Contact Raymac Racing Engines

       This email address is being protected from spambots. You need JavaScript enabled to view it.  

Call us for a free quote!

817.705.5424   or  940.594.0350

Office: Mansfield, Texas       Shop/Dyno: Ft. Worth, Texas

All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.

09/05/18 California law now requires any reseller of California based manufactured parts (including by not limited to Dart, Race Winning Brands, AFR, Scat and Brodix) to inform it's customers of the following

(in accordance with Proposition 65):

 

TOP

Style1

Style2

Style3

Style4

Style5

Style6

Style7

Style8

Style9

Style10