705 BBC 14.5 Degree
705 BBC 14.5 Degree Big Chief Tunnel Ram - "Trash Talker"
(1375HP in Single 4 Barrel, 1975+HP on 1 Stage)
Short Block Kit: $10,600
• Dart Raised Cam 4.600 Bore 55mm Cam, 11in Deck
• Block 10.400 Deck CNC Stroker Clearance
• Callies 5.3in Stroke 4340 Magnum Crankshaft, Internal Balanced
• JE Rings
• GRP 7.210in Long 5500 Pro Series Connecting Rods
• King & Clevite Rod & Main Bearings, 55mm Roller Cam Bearings
Valvetrain & Oil System $7,930
• Manton 7/16” Pushrods
• Jesel +.600 Belt Cam Drive
• Jesel 1.9/1.85 Ratio Rocker Arms
• Bullet Custom 55mm Camshaft 4-7 Swap
• Morel High Pressure Oil, Mechanical Roller Lifters, Ultra Pro, .180 Offset
• Moroso Custom Oil Pan
• Stock Car Products External Pump & Drive Kit
Heads & Hardware: $7,460
• Brodix 14.5 Degree CNC Heads, Titanium Valves .900 Lift 580 CFM
• Moroso Fabricated Valve Covers
• ARP Big Chief 12pt Head Studs
• Dart Valley Lug Kit
• Cometic Head Gaskets
Induction: $3,636
• Profiler Hitman Tunnel Ram Intake Manifold
• Profiler 1x4
• Custom Intake Spacer Kit
• ½” Carb Spacer
• Quickfuel 1450 cfm Dominator
Ignition: $580
• MSD Crank Trigger
• Distributor
• Wires
Finish Out: $700
• ATI Balancer
• FelPro Rear Main Seal, Oil Pan Set, Intake Gaskets, Valve Cover Gaskets, Plugs, Oil, External Oil Filter, Oil Lines, Distributor Clamp, Balancer Bolt, Hardware Kit.
Labor: $4,196
• Stroker Clearance Block
• Seat Liners
• Set Liner Protrusion
• Hone all Cylinders with Torque Plate & Valley Lugs
• Pin Fit Pistons & Rods
• Polish Crankshaft
• Port Match, Spacers, Heads & Intake
• Final Wash All Parts
• Assemble: Selectively Fit Bearings, File Fit Rings, Check all Clearances, Degree Camshaft, Check Piston to Valves, Set Compression, Setup Valvetrain, Port Match Spacers, Heads & Intake, Professionally Assembled.
• Dyno Test & Tune (With N2O)
Engine Kit (No Labor) $35,102
Engine Kit Assembled & Dyno’d $39,298
---------------------------------------------------------
Options:
• Brodix Aluminum Block +$2400 (includes ARP Block Studs)
• 2x4 Carbs Top, Linkage & Spacers +$1500
• +30HP 1650 CFM Dominator Carburetor +$2,200
• Dry Sump +$3,400
• Aluminum ATI Balancer +$105
• Precision O’Ring & Receiver Groove Block & Heads +$750
• Nitrous System Prices Available Upon Request
Contact Raymac Racing Engines
This email address is being protected from spambots. You need JavaScript enabled to view it. 
Call us for a free quote!
817.705.5424 or 940.594.0350
All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.
09/05/18 For our Scat customers..... California law now requires any reseller of Scat products to inform it's customers of the following (in accordance with Proposition 65): WARNING: May Cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov. The notice also states that SCAT will be placing warning labels on those products effected (affixed to products, labels or packaging).
