665 14.5 Degree

 

665 BBC 14.5 Degree Big Chief Tunnel Ram - "Bat Out Beast"
by Raymac Racing Engines
(1300HP in Single 4 Barrel, 1900HP on 1 Stage)
 

Short Block Kit: $9,305
Dart Raised Cam 4.600 Bore 55mm Cam
• Block 10.400 Deck CNC Stroker Clearance

• JE Pistons 4.600 Bore 1.115 C/D, 15.1:1 Compression
• Callies 5in Stroke 4340 Magnum Crankshaft, Internal BalancedJE .200 Wall 93s HD Pins
• JE Rings Nitrited Steel Top, Napier 2nd, Standard Tension Oil, .043. 1/16, 3/16
• GRP 6.760in Long 5500 Pro Series Connecting Rods
• King & Clevite Rod & Main Bearings, 55mm Roller Cam Bearings

Valvetrain & Oil System $10,396
• Manton 7/16” Pushrods
• Jesel +.600 Belt Cam Drive
• Jesel 1.5/1.80 Ratio Rocker Arms
• Bullet Custom 55mm Camshaft 4-7 Swap
• Morel High Pressure Oil, Mechanical Roller Lifters, Ultra Pro, .180 Offset
• Moroso Custom Oil Pan
• Stock Car Products External Pump & Drive Kit

Heads & Hardware: $7,460
• Brodix 14.5 Degree CNC Heads, Titanium Valves .900 Lift 587 CFM
• Moroso Fabricated Valve Covers
• ARP Big Chief 12pt Head Studs
• Dart Valley Lug Kit
• Cometic Head Gaskets

Induction: $3,136
• Profiler Hitman Tunnel Ram Intake Manifold
• Profiler 1x4
• Dart Intake Spacer Kit
• ½” Carb Spacer
• Quickfuel 1450 cfm Dominator

Ignition: $580
• MSD Crank Trigger
• Distributor
• Wires

Finish Out: $700
• ATI Balancer
• FelPro Rear Main Seal, Oil Pan Set, Intake Gaskets, Valve Cover Gaskets, Plugs, Oil, External Oil Filter, Oil Lines, Distributor Clamp, Balancer Bolt, Hardware Kit.

Labor: $3,896
• Stroker Clearance Block
• Seat Liners
• Set Liner Protrusion
• Hone all Cylinders with Torque Plate & Valley Lugs
• Pin Fit Pistons & Rods
• Polish Crankshaft
• Port Match, Spacers, Heads & Intake
• Final Wash All Parts
• Assemble: Selectively Fit Bearings, File Fit Rings, Check all Clearances, Degree Camshaft, Check Piston to Valves, Set Compression, Setup Valvetrain, Port Match Spacers, Heads & Intake, Professionally Assembled.
• Dyno Test & Tune (With N2O)

Engine Kit (No Labor) $32,076
Engine Kit Assembled & Dyno’d $35,972

---------------------------------------------------------
Options:
Brodix Aluminum Block +$2400 (includes ARP Block Studs)
2x4 Carbs Top, Linkage & Spacers +$1500
+30HP 1650 CFM Dominator Carburetor +$2,200
Dry Sump +$3,400
Aluminum ATI Balancer +$105
Precision O’Ring & Receiver Groove Block & Heads +$750
Nitrous System Prices Available Upon Request


Contact Raymac Racing Engines

       This email address is being protected from spambots. You need JavaScript enabled to view it.  

Call us for a free quote!

817.705.5424   or  940.594.0350

All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.
TOP

Style1

Style2

Style3

Style4

Style5

Style6

Style7

Style8

Style9

Style10