Block $2500 (Discounted to $2500 with purchase of Rotating Assembly)
• Dart M2 4.600 Bore, 10.2 Deck +.400, Small Parts Kit
• Dart Valley Kit
• CNC Stroker Clearanced Aluminum Rod, 4.750 Stroke $375
Rotating Assembly $5134
• Callies 4.875 Magnum 4340 Crankshaft, Internally Balanced
• Manley Pro Series I Beam Rods w/ARP 2000 Bolts
• JE Flat Top Pistons 11.0:1 compression w/118cc heads
• JE ProSeal Plasma Moly 1/16, 1/16, 3/16 Ring Set
• King XP Extreme Race Duty Rod & Main Bearings
Cam Drive & Cam Kit $2552
• Jesel .+400 Cam Belt Drive
• Bullet Custom 3 Piece Mechanical Roller Camshaft, Everwear Dist Gear
• Comp Cams High Pressure Oiled Mechanical Lifters
Heads & Top End $5950
• Dart Pro2 380 CNC 2.350/1.850 434/330CFM@.800L, 1.625 Double Springs, Inconel Ex Valves
• Cometic MLS Head Gaskets
• Comp Cams Steel Rocker Arms
• Dart Stud Girdle
• Trend Pushrods
• Polished Cast Aluminum Tall Valve Covers
Oil System $1159
• 14qt Custom Moroso Wet Sump Oil Pan, H/D Marine
• Solid Louvered, Partitioned Windage Tray
• Decel & Accel Baffles/Trap Doors
• ¼ NPT Dip Stick Access Port
• ½ NPT Head Drains
• High Volume High Pressure Fully Welded Oil Pump Pickup
Fuel & Ignition System, Packaging $5134
• Edelbrock Super Victor Intake Manifold
• QuickFuel 1050 2 Circuit Carburetor
• MSD Dual Pickup Dist (for redundant ignition system)
• Dual MSD 6 Marine Ignition Boxes GM-3L
• Dual MSD Pro Power Ignition Coils
• MSD Coil Selector
• MSD Crank Trigger
• MSD 8.5mm Wire Set (Custom)
• MSD Fire Shield
• ATI Balancer
• Edelbrock Victor Water Pump
• MSD Starter
• Oil Pan Gaskets, Intake Gaskets, Valve Cover Gaskets, Oil, Plugs, Filter, Filter Adaptor, Oil Pump Drive Shaft, Fuel Pump Block Off Plate, Rear Main Seal, Hardware, Dist Clamp, Balancer Bolt, Spark Plugs, 1” Carb Spacer
Labor $2900
• Hone Cylinders with Torque Plate & Lugs
• Pin Fit Pistons & Rods
• Polish Crankshaft
• Stroker Clearance (Final) Debur Block, Chamfer Cylinders
• Deck Block
• Disassemble Heads, Clean, Lap Valves, Set Spring Heights, Reassemble
• Final Wash All Parts
• Modify Rods & Lifters for Additional Coolant Oil
• Modify Plenum, Radius on Intake & Port Match
• Professionally Assemble: Selectively Fit Bearings, File Fit Rings, Degree Camshaft, Set Camshaft & Valvetrain Geometry, Complete Build Book, Assemble
• Dyno Test & Tune
_________________________
Total Parts $22,804 (sold as kit)
or
Total Parts & Labor $25,704 (sold as build)
_________________________
Optional Additions:
+$1100 T&D Shaft Rocker System
This email address is being protected from spambots. You need JavaScript enabled to view it.
All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.
09/05/18 California law now requires any reseller of California based manufactured parts (including by not limited to Dart, Race Winning Brands, AFR, Scat and Brodix) to inform it's customers of the following
(in accordance with Proposition 65):