598 BBC 1064HP KIT

 

598/632 Big Duke/Big Chief KIT
by Raymac Racing Engines
 
 

For all those wanting this amazing 598 kit Ray developed and dyno'd at 1064hp....

598/632 Big Duke/Big Chief

Rotating Assembly $4286
Dart 4.750 or 4.500 in Stroke 4340 Center Counterweighted crankshaft, Internally Balanced
Manley H Beam 4340 with ARP 2000 Bolts
GRP Pro Series Aluminum Rods
JE 18 Degree Pistons 14.5 - 15:1 Compression
JE ProSeal Ring Set .043, 1/16, 3/16
King Alecular Extra Clearance Bearings

Rotating Assembly with Block (Short Block) $6296
World 10.2 Deck, 4.600 Bore Merlin IV
Small Parts Kit, Cam Bearings

Heads & Top End $3836
Jesel 18 Degree Big Duke 2.400 x 1.900 Valves .900 Lift
Jesel Shaft Rocker System
ARP Head Studs
Cometic .040 Head Gaskets

Valvetrain $1250
Bullet Custom Camshaft 4-7 Swap, Mechanical Roller
Comp Cams “Sportsman” Pressure Oiled Axle Mechanical Roller Lifters & Lockplate

Oil System $867
Moroso Steel Fabricated Stroker Oil Pan
Moroso Billet Aluminum Oil Pump
Moroso Hardened Driveshaft

Intake, Carb, Ignition & Hardware $2485
Intake Brodix 1 x 4 Single Plane
ATI Balancer Neutral Balance
Carb QuickFuel 1250 Dominator
Distributor & Wires MSD 85551 & 8.5mm Wires

Small Parts/Gasket Kit $265
Pan Gasket, Intake Gasket, Timing Cover Gasket, Rear Main Seal, Valve Cover Gasket, Spark Plugs, Oil Filter Adaptor, Oil Filter, Hardware, Distributor Clamp, Balancer Bolt, Timing Pointer

Total Parts Kit $14,999

ADDITIONAL OPTIONS:
Dart Big M CNC Stroker Clearance Upgrade +$730

Heads Upgrades with Rocker System (Jesel)
18 Degree Dart Pro 1 +$468
Brodix Sweet 16 +$2366
Dart 14 Degree with Titanium Valves, Full CNC $4600
Rings Hellfire Upgrade +$89
2 x 4 Hitman Upgrade +$1981 (Carbs & Linkage)
Callies Magnum Upgrade +$1260
Manley Pro Series I Beam with ARP 2000 Bolts +$127
NX & Induction Solution Kits Available
Receiver Groove & O’Ring; Copper Gaskets Available

Raymac Racing Engines
940.594.0350 Office/Text



598 BBC 1064HP

 

598 BBC Beast. 850 ft/lbs @ 5500 rpm. 1064 hp @ 7300 rpm.
by Raymac Racing Engines
 

FOR SALE as of 2/8/18. Fresh. Still on the dyno! (ONLY 1)
Watch the dyno video from 2/7/18... https://youtu.be/mx6QO2sh1DA

$15,500 for base engine without carb & dist.

Brodix “Big Duke” 18 Degree Cylinder Heads, Steel Valves, Double Springs
Dart Big M Sportsman 4.600 x 10.200 Block
Eagle 4.500 4340 Crankshaft, Internally Balanced
Scat 6.800 “H” Beam 4340 Rods, ARP 2000 Bolts
Wiseco 13.44:1 Compression 043, 1/16, 3/16 Pistons
JE .200 Wall 93s Pins
Speed Pro Hellfire Ring Set
Custom Bullet Camshaft 4-7 Swap .830” Lift
Comp Cams 883 Lifters with Oiled Needle Bearings
T&D Shaft Rocker System
ATI Balancer

Complete Engine as Pictured. Includes 1250 Carburetor, Crab Cap Distributor & Crankshaft Trigger, Dual Plate Systems, Pro Fogger System, Electric Water Pump, Starter, Billet Flywheel, 1 Wire Alternator & Drive, Moroso Vac Pump, Broke-in & Dyno’d
Get it all for $19,000

Raymac Racing Engines
940.594.0350 Office/Text



598/632 BBC Drag/Race

 

598/632 BBC Drag Race Rotating Assembly, Short Block and Long Block Kit
by Raymac Racing Engines
 
 
 

598/632 Drag Race Rotating Assembly (Short Block & Long Block Kit Options)



598/632 Drag Race Rotating Assembly Kit $2600

• Dart 4340 4.5” or 4.75” Stroke Internally Balanced Crankshaft

• Manley 6.700 Rods with ARP 2000 Bolts

• JE/SRP Pistons 4.600 Bore 14.6:1 (598) 14.75:1 (632)

• JE Rings ProSeal, Plasma Moly, 1/16, 1/16, 3/16

• King Alecular Bearings with Extra Clearance


Optional Additions:

• World Merlin IV Block +$2100

    (Block at this price only when purchased with rotating assembly)

• Dart heads 345 Pro1 399/294 cfm .850 Lift Mechanical Roller Assembly  + $2600

    ( Heads at this price only when purchased with block or rotating assembly)

• Valvetrain, Machine Work & Assembly Packages Available

• Oil System & Induction/Ignition Packages Available

• Head Upgrades to 1150hp Available


RaymacRacingEngines.com

940.594.0350 Office/Text - Mansfield, Texas

817.705.5424 Shop/Dyno/No Voicemail - Ft. Worth, Texas

 



Navigation

 


 


SBC Custom Kits:  383 Complete Engine Kit  •  383 Stroker Kit/Stage 1  •  383 Stroker Kit/Stage 2  •  383 Stroker Kit/Stage 3  • 383 Stroker Kit/Stage 4  •  427 SBC All Aluminum  •   434 SBC 650hp


SBC Custom Builds:  400 SBC All Aluminum  •  400 SBC N2O Street/Race •  400 SBC Dart SHP  •  427 SBC Short Block  •  434 SBC 650hp on Pump Gas


BBC Custom Kits:  496 BBC Forged Power  •  540/496 BBC Pro Street/Strip • 540 Short Block July 4th & SUMMER SALE •  540 BBC All Aluminum Long Block  •  540 BBC Rotating Assembly  •  540 BBC Pump Gas 650hp  •  540 BBC Pump Gas 810hp  •  540 BBC Street/Strip N2O  •  540/550/565 BBC Blower Motor  •  565 BBC Forged Rotating Assembly  •  565 BBC Sportsman Rotating Assembly  •  565 BBC Super Street  •   565 BBC 900hp   •  582 BBC Forged Rotating Assembly  •  598 BBC 1064hp  • 598/632 BBC Drag/Race •  605 BBC Mild/Wild622 BBC All Aluminum 1050hp  •  632 BBC Short Block  •  632 BBC Big Chief Short Block Kit  •  632 BBC Big Chief Long Block Kit  •  632 BBC Block & Rotating Assembly   •   632 BBC MED Duty NOS   •   632 BBC SR20 NOS   •  632 "Patriot" Complete Kit  •  632 BBC Street Race Rod Kit  •  632 N2O 1800hp •  632 1000hp  •  665 BBC 14.5 Degree  •  665 BBC Idles at 800rpm  • 705 BBC 14.5 Degree  •  747 BBC Torque Monster


BBC Custom Builds: 555 BBC Bracket Motor 900+hp  •  632 BBC SR20/12 Engine Kit  •  632 BBC SR20 NOS
  •  632 BBC Heavy N2O Options  •  665 BBC Heavy N2O  •  747 BBC Torque Monster


SBF Custom Kits:  347/363 SBF Rotating Assembly  •  427 SBF Short Block   •   427 SBF 700hp

BBF Custom Kits:  429/460 BBF Rotating Assembly


BBF FE Custom Kits:  360/390 BBF FE Rotating Assembly & Long Block


Ford Modular Custom Kits:  Ford Coyote Boss 5.0

 


LS Based Custom Builds: 502 LS Short Block Assembled


LT1 Custom Kits:  LT1 Rotating Assembly


Gen VII (8.1) Custom Kits:  8.1L with Options


Mopar Custom Kits:  MOPAR 440 into a 500/545


Industrial:  505 8.3 Liter  •  535 8.8 Liter  •  632 10 Liter  •  598 9.8 Liter  •  732 12 Liter  •  747 Torque Monster

Callies Dragonslayer:  SBC   •  BBC  •  LS1 GEN II-IV  •  SBF


Callies Magnums:  SBC  •  BBC  •  LS1 GEN III-IV  •  SBF  •  460 Ford  •  440 & Hemi Mopar


Cast Pro Stock:  SBC 350 Int  •   SBC 350 Ext  •  SBC 350 Late Int  •  SBC 350 Late Ext  •  SBC 400 Ext   •  BBC 454 Ext   •  BBC 454 Late  •  Ford 351W  •  BBF 460 

Aluminum Blocks:  Chyrsler 440W  •  BMP BBC  •  54902 RHS LS Bare Race  •  54907U RHS LS Solid AL  •  54908U RHS LS Solid AL  •  SBC Brodix 410 Sprint  •  SBC Brodix 400/4.125 Bore •  SBC Brodix 350/4.125 Bore  •  SBC Brodix 400/4.00 Bore  •  SBC Brodix 350/1.00 Bore

Ignition:  Distributors & Starters

CNC Cylinder Heads:  SBC 190cc 23 Degree  •  LS Series  •  BBC 360cc 24 Degree


BBC Dart Cylinder Heads: Dart 360


BBC Aluminum Entry Level Cylinder Heads:  Aluminum Entry Level + Flow Chart


BBC Brodix Cylinder Heads:  Brodix BB1


BBC RHS Cylinder Heads:  RHS Pro Action

BBC Pistons:  BBC Big Chief Piston Set


 

A few of our ultra performance kits, builds, components & parts:

                                                            

    

 


SuperFlow Dyno on location at Raymac Racing Engines. Click to watch:

            

 

Contact Raymac Racing Engines

       This email address is being protected from spambots. You need JavaScript enabled to view it.  

Call us for a free quote!

817.705.5424   or  940.594.0350

Office: Mansfield, Texas       Shop/Dyno: Ft. Worth, Texas

All products are subject to availability. Customizing a part may delay shipping. All prices are subject to change.

09/05/18 California law now requires any reseller of California based manufactured parts (including by not limited to Dart, Race Winning Brands, AFR, Scat and Brodix) to inform it's customers of the following

(in accordance with Proposition 65):

 

TOP

Style1

Style2

Style3

Style4

Style5

Style6

Style7

Style8

Style9

Style10